home assistant synology

Andrey, docker run --name home-assistant --restart=always --net=host -itd-v /volume1/Shared/docker/homeassistant/config:/config homeassistant/home-assistant, sudo docker run --name home-assistant --restart=always --net=host -itd-v /volume1/Shared/docker/homeassistant/config:/config homeassistant/home-assistant, docker run --name home-assistant --restart=always --net=host --privileged -itd-v /volume1/Shared/docker/homeassistant/config:/config --device /dev/ttyUSB0 homeassistant/home-assistant, sudo docker run --name home-assistant --restart=always --net=host --privileged -itd-v /volume1/Shared/docker/homeassistant/config:/config --device /dev/ttyUSB0 homeassistant/home-assistant, docker run --name home-assistant --restart=always --net=host --privileged -itd-v /volume1/Shared/docker/homeassistant/config:/config --device /dev/ttyUSB0 -v /dev/bus/usb:/dev/bus/usb homeassistant/home-assistant, sudo docker run --name home-assistant --restart=always --net=host --privileged -itd-v /volume1/Shared/docker/homeassistant/config:/config --device /dev/ttyUSB0 -v /dev/bus/usb:/dev/bus/usb homeassistant/home-assistant, Run Home Assistant Docker without Z-Wave (DSM 5), Run Home Assistant Docker without Z-Wave (DSM 6), -v /volume1/Shared/docker/homeassistant/config:/config, Run Home Assistant Docker with Z-Wave (DSM 5), Run Home Assistant Docker with Z-Wave (DSM 6), Run Home Assistant Docker with Z-Wave and Bluetooth (DSM 5), Run Home Assistant Docker with Z-Wave and Bluetooth (DSM 6), docker rename home-assistant home-assistant-old, docker run --name home-assistant --restart=always --net=host -itd -v /volume1/Shared/docker/homeassistant/config:/config homeassistant/home-assistant, Installing Home-Assistant.io on a Synology Diskstation NAS, https://philhawthorne.com/wp-content/uploads/2015/12/philhawthorne_black.png, https://philhawthorne.com/wp-content/uploads/2016/10/home-assistant-all-cover-min.jpg, J.A.R.V.I.S inspired announcement/greeting for Home Assistant, Automating your shopping list with Home Assistant and Grocy, Breaking down Presence Detection with Home Assistant, Making music follow you around the home with Home Assistant and Sonos, HA-Dockermon Use Home Assistant to monitor, start or stop Docker Containers, Setting up a local Mosquitto server using Docker for MQTT Communication Phil Hawthorne, https://home-assistant.io/docs/ecosystem/hass-configurator/, https://community.home-assistant.io/t/simplistic-configuration-ui/10175/147, https://uploads.disquscdn.com/images/d6c71e2d595fbe7883fd6f258e498fdb62a5ff86f4d91b0159a7f20b32632ee6.jpg, https://uploads.disquscdn.com/images/f921593daa70daacbbbf09038a7ca3fc03720ada8c5803dc22f6433988c72927.jpg, https://drive.google.com/open?id=1a-Xm3b6yCgKw0JP_Une8Fo20hzGST2AK, https://gist.github.com/soccerob/8d8ba635c09f8e94e5a0d8db609ac4e6, https://philhawthorne.com/ha-dockermon-use-home-assistant-to-monitor-start-or-stop-docker-containers/, https://gist.github.com/frenck/32b4f74919ca6b95b30c66f85976ec58, https://www.youtube.com/watch?v=QtqgvoheXGQ, https://uploads.disquscdn.com/images/3918e856bf2553e9ba29e63900902d12253351a33f49f649ebcb24afef7199aa.png, https://uploads.disquscdn.com/images/82b3284778356b22f2d6f688d21d287ff902c33a2fd770a443a6b516bca94bf6.png, Login to your Synology NAS from a browser, using the. The help says run commands: This will make our lives much easier. That will give the files access to all users on the NAS. crw- 1 root root 166, 0 Jan 5 09:55 /dev/ttyACM0, I have a putty session to the NAS to run the ls -l that gives the result above. Unless of course youre using DSM 6, which you can use the admin account if you prefix all docker commands with sudo. If Home Assistant still wont start, I open up an SSH connection as root, and perform the following command, Remove the USB Radio from the NAS, and plug it back in. I can access to this path by ssh. Ive just checked my DSM (which is DSM5) to see what containers mine displays.but it wont load for me (might be because Im accessing it remotely). After that, well want to put all the files from inside the shared folder back into the original location, so well use. What is the advantage of MySQL/Maria over the built in database? The virtual machine will take a little while to import, but after it does, the virtual machine will power on. On my version, I need to enter the username root. Are you running this configurator? Hi Tried the command, and this is what I got: docker rmi homeassistant/home-assistant:latest brilliant blog nice tutorials and inspiration thanks for sharing! What does your configuration.yaml file look like? When you perform your docker run command, the user youre SSHd in as will determine who the container runs as. https://uploads.disquscdn.com/images/82b3284778356b22f2d6f688d21d287ff902c33a2fd770a443a6b516bca94bf6.png This sensor will wake up your Synology NAS if its in hibernation mode. Now that Advanced Mode is enabled, we can install the Terminal & SSH application. Disable any OpenVPN Connections when starting Docker After navigating to the Home Assistant URL, Home Assistant will be preparing, which can take 10-20 minutes in total. Also import is the t, which tells Docker to tag the container for future use. (USB device is acm0, still have to check what a reboot will do on my setup). If that doesnt work, just check that you have enabled User Homes in your Synology config, as described in the article. Should these groups be visible when logged in to the NAS or are they set up within the Docker container somehow? I am still using the same container I setup for these instructions: https://www.youtube.com/watch?v=QtqgvoheXGQ, I tried something similar with the eclipse mosquitto. Like everyones, my config changes so often that it is a mess and unorganized. Anything would be helpful . ssl_key: /certificate/_archive/fyjQFl/privkey.pem. NOTE: If you havent created a VMM storage (this is done when you first set up Virtual Machine Manager), youll have to go through and first set that up. Excellent write up and Im really appreciative that you shared it. Looks like youre using the admin user (and not root), so assuming youre on DSM 6. The one that sticks out to me is, If you are on Windows and youre using Python 3.5, download the Netifaces dependency, Home Assistant recently upgraded the Docker images to Python 3.6. Hi Phil, A70252DY) as my z Wave stick. Code owners of synology_dsm can trigger bot actions by commenting:. Still, I have some questions: 1) How up to date are these instructions regarding the latest releases? A powerful and nerdy router that's also great for average users. Ive been using Home Assistant on my Synology for a few months now. I dont really have a preference, but Ive been using sameersbn/mysql without problems. It seems to have more configuration options. Any ideas? Home Assistant is a free, open source program for Home Automation. When it comes time to upgrade your version of Home Assistant, we need to login via SSH again. Note: Check out my new guide on how to Install Home Assistant Supervisor. That's what I run and have no issues. So when Home Assistant reboots, the container is already up and ready to go. There are dozens of devices listed. Someone else had the same question yesterday on YouTube , Youve done everything right. Please Support My work by Making a Donation. Original version also do not start (Its my oponion I renamed to home assistant-old). mkdir: cannot create directory /volume1/Shared: Permission denied 5. This is a big issue because I dont know how to edit configuration.yaml as no text editor is available in Synology ssh. Unraid has its own community 'app' store of docker images like the synology docker registry, supports GPU passthrough for use in plex for transcoding or object vision :-) 2 yr. ago General: The information on this blog has been self-taught through years of technical tinkering. Im super new to docker and linux, so figuring this out as I go. . In the bottom right, click on the This container will be running an operating system, that will in-turn run Home Assistant. Any potential issues using this method over command prompt for updates? Beside this Discovery issue, everything else is working properly under either net=host or bridge mode Would you have any idea on how to get this going on Windows? And while it might have been true in the beginning that Home and Siri did not allow much more than turning single devices on or off, that has certainly changed. ; Task Settings: Check "Send run details by email", add your email then copy paste the code below in the Run . Remember, as weve only included the config directory in the -v flag, the Home Assistant container wont be able to access anything outside of that directory on the NAS. You will be able to see them in the Docker UI of Synology. I am not using this configurator unfortunately. Hopefully its still the same in the latest versions. So, if you want to enable Z-wave and Bluetooth in Home Assistant, your new Docker run command looks like. This will ensure the container gets as many permissions as possible to the host machine, which may include the rw permissions it needs to the Z-wave USB. Thank you for the explanation, however Im now stuck with one error: sudo docker run name home-assistant restart=always net=host privileged -itd -v /volume1/docker/hass/config:/config device /dev/ttyACM0 homeassistant/home-assistant Disable those entities if you dont want your NAS to be fetch as frequently. Note: How to Clean Docker Automatically. Something to look into I guess! In my experience, when the z-wave issue would occur, I had no trouble still accessing the Z-wave USB by its path. 13. Heres my run command. When I start VMM I get a message I need to very the Hostsettings: Open vSwitch cant switched on automatically because there are one or more bonding-interfaces. As noted above, you do not need access to the DSM and Home Assistant will still be able to read statistics from your NAS. Then try running your docker containers again with docker start. [ 74.629569] usb 1-2: Endpoint 1 MaxPacketSize 64 The database appears to be there but Im getting this error: 2019-02-14 23:52:16 ERROR (Recorder) [homeassistant.components.recorder] Error during connection setup: (MySQLdb._exceptions.OperationalError) (1045, Access denied for user hass@192.168.0.3 (using password: YES)) (Background on this error at: http://sqlalche.me/e/e3q8) (retrying in 3 seconds), Im looking into the error, but its like reading Mandarin Chinese. It depends on your DSM version, and what things used to create the container. image: eclipse-mosquitto:latest Any creative ideas on how to automate this? Thanks for fast response! I have a Rasperry Pi 4 with SSD running Home Assistant OS. Thanks! Thanks for your quick response. Point the location where your certificate files are stored in your Synology directly in your configuration.yaml. /certificate/system/default (which I can access)? My configuration is: Hass.IO on Synology Docker (PC with firmware). usb_path: /dev/ttyACM0 Because Im not command-line friendly and I like the ability to see the container running in the Synology Docker UI, see its processor/memory usage and restart it from there is it possible to get the commands required to map the USB in the container via Docker UI?. HA lets you control and access your smart home devices on the local . May be homassistand did not make when started. I have a question to you, I run also for a while now HASS on the Syno 1515+ and I like it very much. Home Assistant on Synology inside Docker - #001 BeardedTinker 36K views 3 years ago Living without add-ons on Home Assistant Container Home Automation Guy 58K views 10 months ago. All is well now! You could have a Home Assistant automation, which starts the Domoticz container. configurator: This post was updated on Tuesday / February 21st, 2023 at 3:27 PM, Support my work Marius Bogdan Lixandru mariushosting Is the Ideal Resource for Sysadmins & NAS Geeks Copyright 2019 2023 All Rights Reserved. Make sure youre using sudo in your command. Is there any tricks I need to be aware of when rebooting? Get the current name of your container and version sudo docker ps In running this command, note the NAME of your container as well as the IMAGE. Now, in my spare time, I want to set also docker-hub, graphana and so on. In terminal, it shows all 3 and the latest one is actively running, but the containers list in the GUI has no record of active containers, but the CPU/RAM indicators show activity and I can reach Home Assistant via a browser (both of the old containers are off). How to setup rsync on a Synology Diskstation and use it to backup data from Home Assistant to the NAS. Im not sure if Synology have pushed an update out, or if it was just Murphys Law by me posting the article. So, if youre editing a new automation and make a YAML syntax error (which you will do), you wont need to open up SSH again to get Home Assistant started once you fix the problem. After loading the drivers I was able to see ttyUSB0 device. If you have the Enforce 2-step verification for the following users option checked under Control Panel > User > Advanced > 2-Step Verification, youll need to configure the 2-step verification/one-time password (OTP) for the user you just created before the credentials for this user will work with Home Assistant. If you want to add cameras from Surveillance Station, the user needs application permission for Surveillance Station. I personally thought the udev mapping was a bit overkill. Open Virtual Machine Manager, select Virtual Machine, then Create, and finally, Import. Thanks! So, I have enough ports and will wait and see if I ever need more and then just try , I realize this is a bit of an old thread, but figured it would be the best place to ask.. So far, Ive rebooted my NAS a couple of times and both times Home Assistant and my z-wave network have come back up perfectly. The worst part was even after correcting the config.xml path in Docker, the lock STILL didnt work. Note: How to Change Docker Containers Restart Policy. So, unfortunately youll need to do a rename or destroy the old container. Hi, I dont really have any pure Z/Wave devices, I have either deliberately chosen HomeKit-compatible devices or devices that I can integrate into HomeKit through HomeBridge. As of 0.39, the mount path is /usr/local/lib/python3.5/site-packages/libopenzwave-0.3.2-py3.5-linux-x86_64.egg/config/options.xml. DSM will walk you through the process of setting up the one-time password for this user which youll then be able to use in Home Assistants frontend configuration screen. However, it does depend on having the HA configuration directory outside the container (which isn't difficult to set up, and a good idea anyway because otherwise, if your Docker container gets removed, your HA setup gets removed). Im getting the following in the logs: I tried installing HomeAssistant in Docker on a Synology DS218+ DSM6, but the web server doesnt start. As I understand it is all required to use BLE in HASS.IO Maybe i need to restart docker from synology every 24h? It has a very wide range of device support, and, as of November 2021, it features support for over 2600 modular plugins or add-ons with system integrations to different IoT technologies; systems and services are available as integration components. Strange. Install Docker via Synology Package Center. Enter your email address below to receive my latest blog posts and videos about Home Automation in your Inbox. The last part of the address tells the browser to connect to port 8123, which Home Assistant listens to. Howd you navigate to _archive? Thank you for your guide, it works perfect! Yes. You can set up Home Assistant on a Synology NAS relatively easily in Docker, however, there are a bunch of benefits to installing the supervised version. I tried running it on a regular debian install, and that was a pain as well Basically, if you dont want to run it on a rPi, youre in for a ride.. Def have to spend more than a week down here! For a quick start with Home Assistant on Docker in Synology, download my DSM Docker settings file for 0.63.2 here: https://drive.google.com/open?id=1a-Xm3b6yCgKw0JP_Une8Fo20hzGST2AK This already has the localtime mapped, the Timezone set, the USB device mapped, etc. So these paths are no longer valid? From the list, search and select Synology DSM. Yeah I have trouble restarting from inside HASS as well. Entity reporting the security status of the NAS. This at least is true for DSM5. Although I havent heard of it happening, you could potentially brick your NAS if you do something wrong. https://uploads.disquscdn.com/images/d6c71e2d595fbe7883fd6f258e498fdb62a5ff86f4d91b0159a7f20b32632ee6.jpg. I cant understand what is correct sudo insmod /lib/modules/ftdi_sio.ko. Trying to follow the instructions here, but I get stuck at creating the folder before installing Home Assistant. I guess I can run the rpi version inside docker.. but is that any better or worse? This is one of the flags you cant set when using the Docker DSM UI. Conclusion How to Set Up Home Assistant Supervised on a Synology NAS, latest version of the VMware ESXi/vSphere, How to Backup to a Synology NAS with Time Machine. Only problem i have is with pushbullet. When creating the user, it is possible to deny access to all locations and applications. Clear Current Container Container > select container > Action > Clear Ah interesting. Here you can validate the latest version you currently have deployed. I would first close down all of your docker containers with docker stop. I cannot access this path by Synology File Station. That sounds pretty irritating. Synology DSM - Home Assistant Synology DSM The Synology DSM integration provides access to various statistics from your Synology NAS ( DSM 5.x and higher) as well as cameras from the Surveillance Station.
Tennessee Judicial Conference 2022, Articles H